Contact Information
DMD Environmental, Inc.

3424 West Laskey Road
Toledo, Ohio  43623-4032

(419) 473-1980 - Telephone
(419) 473-1985 - Fax

Industrial Hygiene

DMD has many years of experience with industrial hygiene. DMD has performed indoor air quality testing for schools, institutions, commercial, and residential buildings. DMD utilizes a vast knowledge of building construction to help determine problems. DMD uses different direct read instruments such as Drager Tubes, Multi-Gas Detectors, Photo Ionization Detectors, and Jerome and Lumex meters. DMD also uses other media to sample for silica, respirable dust, etc. Sampling is performed under National Institute for Occupational Safety and Health (NIOSH) and/or Occupational Safety and Health Administration (OSHA) guidelines. For required analysis, DMD subcontracts an American Industrial Hygiene Association (AIHA) accredited laboratory. DMD also has a Certified Industrial Hygienist (CIH) on retainer for review of analytical results and recommendations.
Mold Inspection

DMD has extensive experience in mold inspections in schools, commercial, and residential buildings. Bulk sampling (bulk or tape lift) detects whether or not mold growth is present and what type the mold is. Air sampling (Air-O-Cell) is performed to determine the levels of mold in the air. Air sampling is also performed after mold remediation to determine if an area is safe to reoccupy. This sampling is performed under NIOSH and/or OSHA guidelines and analysis is performed by an AIHA accredited laboratory.